ML20930: Latchbolt by grip either side only when solenoid is energized. Outside grip locked when solenoid is not energized. Inside grip always free. Auxiliary latch deadlocks latchbolt.
Door Thickness
1-3/4" (44mm) standard.
Backset
2-3/4" (70mm).
Case
Heavy-gauge chrome plated steel, 5-7/8" (149mm) x 4" (102mm) x 15/16" (24mm).
Handing
Non-Handed
Keying/Keyways
Less Cylinder
Latchbolt
2-piece mechanical anti-friction insert, 5/8" (16mm) x l" (25mm) x 3/4" (19mm) throw.
Faceplates/Armor Fronts
Wrought brass, bronze or stainless steel attached by machine screws to lockcase front.
Strikes
Wrought brass, bronze or stainless steel ANSI straight lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/8'' (29mm) lip to center.
Electrical Specifications
24VAC/VDC @ 390mA Continuous duty solenoid.
Certifications
Meets FF-H-106C.
U.L. Listed
All locks listed for A label and lesser class doors, 4' x 10' single or 8' x 10' pair. Letter F and UL symbol on armored front indicate listing. Meets requirements of UL1034.
The 5205 series are used for electric strikes, bells, buzzers, chimes, and other low voltage devices. A complete line of UL listed step down transformers and easy to install, low voltage, 120AC...
ETH2W4545 640 5SW — Command Access Technologies Electrified Hinge Energy Transfer Hinge, 4-1/2 In. by 4-1/2 In., 5 Knuckle Standard Weight, 2 Wire, 20 Guage, Oxidized Satin Bronze Over Copper Plated...
Schlage Electronics CTE-MTB15-485 CTE ENGAGE Single Door Controller with Mobile Enabled Multi-Tech Single Gang Reader Kit, Direct RS-485 Connection, 125 kHz Proximity Card, 13.56 MHz Smart Card, FIPS...
The SDC EntryCheckâ„¢ 918 Series are indoor stand alone digital keypads designed to control access of a single entry point for facilities with up to 500 users. Each user is assigned a personal...