ML20905: Latchbolt by grip either side only when solenoid is energized. Outside grip locked when solenoid is not energized. Latchbolt by key outside when solenoid is not energized. Inside grip always free. Auxiliary latch deadlocks latchbolt.
Door Thickness
1-3/4" (44mm) standard.
Backset
2-3/4" (70mm).
Case
Heavy-gauge chrome plated steel, 5-7/8" (149mm) x 4" (102mm) x 15/16" (24mm).
Handing
Non-Handed
Keying/Keyways
Less Cylinder
Latchbolt
2-piece mechanical anti-friction insert, 5/8" (16mm) x l" (25mm) x 3/4" (19mm) throw.
Faceplates/Armor Fronts
Wrought brass, bronze or stainless steel attached by machine screws to lockcase front.
Exposed Trim
Lever x Lever
Strikes
Wrought brass, bronze or stainless steel ANSI straight lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/8'' (29mm) lip to center.
Mode of Operation
Fail Secure
Electrical Specifications
24VAC/VDC @ 390mA Continuous duty solenoid.
Certifications
Meets FF-H-106C.
U.L. Listed
All locks listed for A label and lesser class doors, 4' x 10' single or 8' x 10' pair. Letter F and UL symbol on armored front indicate listing. Meets requirements of UL1034.
The 5205 series are used for electric strikes, bells, buzzers, chimes, and other low voltage devices. A complete line of UL listed step down transformers and easy to install, low voltage, 120AC...
ETH2W4545 640 5SW — Command Access Technologies Electrified Hinge Energy Transfer Hinge, 4-1/2 In. by 4-1/2 In., 5 Knuckle Standard Weight, 2 Wire, 20 Guage, Oxidized Satin Bronze Over Copper Plated...
Schlage Electronics CTE-MTB15-485 CTE ENGAGE Single Door Controller with Mobile Enabled Multi-Tech Single Gang Reader Kit, Direct RS-485 Connection, 125 kHz Proximity Card, 13.56 MHz Smart Card, FIPS...
The SDC EntryCheck™ 918 Series are indoor stand alone digital keypads designed to control access of a single entry point for facilities with up to 500 users. Each user is assigned a personal...
