The 2678-6-14AC/DC series are used for new or replacement installations in aluminum, hollow and metal jambs and use with locksets having up to 5/8" throw, based on 1/8" door gap. It is useful when converting an MS lock to a dead latch and auxiliary lever ramps for use with locksets containing dead-locking levers.
Features:
Satin Aluminum finish
Faceplate: 6-7/8" x 1-1/4"
1/8" horizontal latch adjustment
900 lbs holding force
Auxiliary ramp: 3-3/8"
Mortise backset: 1-9/16"
6-14V AC/DC
Durability: 500000 life cycles
Solid cast latch - chrome plated
Releases under slight door preload
Allows adjustment for wider latch bolts and poorly aligned doors and locksets
Satin Aluminum finish
Faceplate: 6-7/8" x 1-1/4"
1/8" horizontal latch adjustment
900 lbs holding force
Auxiliary ramp: 3-3/8"
Mortise backset: 1-9/16"
6-14V AC/DC
Durability: 500000 life cycles
Solid cast latch - chrome plated
Releases under slight door preload
Allows adjustment for wider latch bolts and poorly aligned doors and locksets
For use in new or replacement installations in metal jambs. Centerline of the latch is 3/8" below ANSI centerline for offset applications. Fits a standard 4-7/8" ANSI prep with little jamb...
SMP5E Power Supply/Charger Kit, Single Output, 6/12/24VDC @ 4A, 24/28VAC, BC100 Enclosure Altronix SMP5E power supply/charger converts a low voltage AC input into a 6VDC, 12VDC or 24VDC output. This...
Trine push button multi-family in polished solid brass Features: Polished Solid Brass finish Housing: 4-3/4"L X 5/8"W X 3/4"H for use up to 30 volts AC or DC Polished Solid Brass...
The SDC EntryCheck™ 918 Series are indoor stand alone digital keypads designed to control access of a single entry point for facilities with up to 500 users. Each user is assigned a personal...
The Trine 3000 Series electric strike are designed to install easily, perform reliably, and provide years of trouble free security. The Trine 3234 series are designed for new installation or...
For use in new or replacement installations in wood and metal jambs. For use with locksets having up to 5/8" throw, based on 1/8" door gap. Features: Steel Face Plate 5-7/8" x 1-1/4" Narrow Style...
For use in new or replacement, aluminum or hollow, metal jamb installations. Auxiliary lever ramps for use with locksets containing dead-locking levers. Use with latch bolts having up to 5/8" throw,...
For use in new or replacement installations in wood and metal jambs. For use with locksets having up to 5/8" throw. - 5/8" throw is based on a 1/8" door gap Features: Face Plate – 1-1/4" X 5-7/8"...
