Seco-Larm - Electric Door Strike w/ RF Receiver & RF Wireless Transmitter w/ Plug-in Transformer - Fail-safe / Fail-secure - 12VDC - UL Listed
Electric Door Strike w/ RF Receiver & RF Wireless Transmitter w/ Plug-in Transformer - Fail-safe / Fail-secure - 12VDC - UL Listed
Can fit any door with optional latch.
- Seco-Larm - Electric Door Strike - Metal Doors - Fail-safe / Fail-secure - 12VDC - UL Listed
- Seco-Larm - 2-Channel RF Receiver - 11~24 VAC/DC - 315MHz - Two Relays
- Seco-Larm - 315MHz Pendant RF Transmitter with 2 Button - 3 Channel - Pre-coded.
- Seco-Larm - 12VDC Plug-in Transformer
The SECO-LARM® Electric Door Strike can be used to convert cylindrical lock sets into an electronic access controlled locking system. Combine with an optional SECO-LARM® digital keypad for keyless high security.
- UL 294 & UL 1034 Listed
- Can be used with virtually any cylindrical door locking system
- Can use with an optional digital keypad
- Suitable for office-type applications
- Reversible non-handed design fits either right hand or left-handed doors
- Shallow design for use with most metal doors
- Powered by a solenoid, not a buzzer coil
- Static strength – 1,000 lbs. (454kg)
- Stainless steel keeper for strength and long life
- Non-polarized connection
- Tested to 250,000 cycles (UL Tested)
- Fail-secure or Fail-safe
- Dimensions: 4-7/8"x1-1/4"x1-1/4" (124x32x32 mm)
- Operating Temperature: 14°F~113°F (-10°~45° C)
- Dynamic strength: 50-ft-lbs. (6.91 m-kgs)
- Static Strength: 1,000 lbs. (454kg)
Seco-Larm - 2-Channel RF Receiver - 11~24 VAC/DC - 315MHz - Two Relays:
- 5 Programmable output modes:
- 4-Second momentary, toggle, latch, validity (receiver outputs for as long as the transmitter button is pressed), 1-second momentary
- New! 2 Independently programmable channels
- Compatible with all 315MHz ENFORCER transmitters
- Use to control garage door opener, house lights, alarm control panel, or other devices via remote control
- Two Form C dry relay contact (NO/NC/COM) outputs. Rated 10A@24VDC
- Frequency 315MHz. 433MHz
- This revolutionary receiver incorporates:
- --1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
- --2.HIGHER SENSITIVITY for greater operating distances.
- --3.UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
- --4.GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration
- 2 LEDs (one for each channel) indicate RF reception, learn mode entered, transmitter learned, memory cleared
- 2 Mode switches (one for each channel) for easy transmitter learning
- Learns up to 30 transmitters (15 for each receiver channel)
- Screw terminals for simple connection
- Accepts ENFORCER fixed code or CODEBUMP transmitters
Seco-Larm - 315MHz Pendant RF Transmitter with 2 Button - 3 Channel - Pre-coded.
- Over 68 billion possible codes
- LED transmission indicator only appears when buttons are pressed
- Operates up to 500ft (150m)*
- RF Anti-scan protection
- FCC and IC Certified
- 315MHz (433.92MHz available)
- Compatible with all 315MHz SECO-LARM receivers
- Slimline design: 1-1/4"x2-3/16"x5/16" (31.5x55x8 mm)
- Replacement batteries available: X-930-096 (CR2032)
- Patented design
- *Actual range will vary greatly depending on the installation and operating environment
Seco-Larm - 12VDC Plug-in Transformer - 2 AMPS
This is a 12VDC Plug-in Transformer running at 2 Amps. Made by Seco-Larm. With its variety of uses in both commercial and residential security, this transformer has proven itself time and time again.
- Use in a wide variety of applications including CCTV, access control, and security
- Sideways plug for easy use with power strips
- Universal 100-240 VAC input. Regulated 12VDC output
- 4ft (1.2m) cord, 2.1mm plug (positive center)
- Low power consumption