What is the best commercial mortise lock?

The Schlage L9000 is the most widely specified. The Sargent 8200 has the highest cycle count at 14M+. The Corbin Russwin ML2000 is heavily specified on government projects. All are ANSI/BHMA Grade 1.

What is the difference between Grade 1 and Grade 2 locks?

Grade 1 locks are tested to 1,000,000+ cycles with higher impact resistance. Grade 2 are rated for 250,000 cycles. Grade 1 is standard for commercial exterior doors and high-traffic areas.

What is the best door lock for school classrooms?

The Schlage ND78 classroom security lock allows locking from inside without opening the door, meets ADA requirements, and maintains fire egress compliance.

What is the difference between Schlage ND and ALX?

ND is Grade 1 with 1M+ cycles and electrified options. ALX is Grade 2 with 250K cycles and modular chassis at lower cost. They share the same lever designs.

What is the most common commercial door closer?

The LCN 4040XP is the most widely specified surface-mounted commercial door closer in the US, covering sizes 1-6 and all three mounting types.

What locks are used in hospitals?

Grade 1 mortise locks on high-traffic doors, cylindrical locks on patient rooms, electronic access with audit trails on pharmacy and restricted areas.

How much cheaper is wholesale vs retail door hardware?

Wholesale pricing on commercial door hardware is typically 20-40% below manufacturer list price. Project quotes for large orders can be even lower.

Altronix AL600ULB Power Supply Charger, Single Output, 12/24VDC @ 6A, Input 28VAC, Board

$284.00

(No reviews yet) Write a Review

Brand: Altronix
SKU:: AL600ULB

$284.00

Description
Show Reviews

Altronix AL600ULB UL Recognized power supply/charger converts a 28VAC/200VA input into a single 12VDC or 24VDC non power-limited output. It also offers a suite of features that includes AC fail supervision, battery presence, and low battery supervision.

Input
- Input two (2) 28VAC/100VA, 1A transformers.
Output
- 12VDC or 24VDC selectable output.
- 6A continuous supply current.
- Filtered and electronically regulated output.
- Short circuit and thermal overload protection.
Battery Backup
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
Supervision
- AC fail supervision (form "C" contacts).
- Low battery supervision (form "C" contacts).
- Battery presence supervision (form "C" contacts).
Visual Indicators
- AC input and DC output LED indicators.
Temperature
- Operating: 0° C to 49° C (32° F to 120° F).
- Storage: - 20° C to 70° C ( - 4° F to 158° F).
- Relative Humidity 85% +/- 5%.
- System AC input VA requirement: 230VA.