More Views

Codelock CL5000 Series Model# CL5250BB Heavy Duty electronic keyless lock Mortise Back to Back doublesided


Quick Overview

Codelock CL5000 Series Model# CL5250BB Heavy Duty electronic keyless lock Mortise Back to Back doublesided

* Required Fields



Lock variations:
CL5010 Tubular Mortice Latch; 2-3/4" BACKSET IS STANDARD CL5020 Mortice Latch


This is a heavy duty keyless digital lock with full size lever handles, allowing use as the primary lock on most doors, particularly in high traffic situations.

The 5000 model is a stylish, contemporary design, ideal for a wide range of heavy duty entry control applications.

The Piezo actuator, used for the first time in a stand alone electronic lock provides a battery life of over 500,000 operations (approximately ten times more than a typical electronic push button lock).

The CODELOCK CL5000 has the following available features:
A simple and cost effective access solution.
500,000 Operations from 4 x AA cells, batteries included.
Easy installation and programming
90 different user codes
1 Single-Use code
Reliable - Solid state Piezo technology, with low component count
Durable - Tested to over 1,000,000 cycles @ 2.4 Nm
Weather resistant Physical Vapour Deposition finish
Remote push button and Emergency Alarm release connections

Back to Back
Any of the code locks below may be ordered with two keypad plates for mounting on each side of the door to provide coded access in both directions.

Available in two PVD finishes
Stainless Steel, Polished Brass


CL5010 Tubular Mortice Latch
Outside lever turns freely without operating the latchbolt. When valid code is entered and blue light burns, the lever will retract the latchbolt. When the door closes the spring latch will automatically lock the door. The key will open the door for management functions. The key may be used to set the lock into Code Free mode so that anyone can open the door without using a code. Code Free mode can also be programmed at the keypad using the Master Code.
      View technical diagram / specification

CL5020 Mortice Lock
Outside lever and key functions as CL5010. Uses an ANSI style full mortise chassis with deadlocking latchbolt for long lasting use on heavy duty doors.
    View technical diagram / specification

Additional Information

Model CL5250BB
Manufacturer Codelocks
Download No

You may also be interested in the following product(s)