9325 Series Stand-Alone Keypads. EXTERIOR MODEL
Elegant, yet durable, the 9325i and 9325e are cost efficient keypads that blend in with any decor. Ideal for interior or exterior applications (depending on model), this keypad can accommodate up to 120 users.
Data safe - even in the event of a power failure, your 6-digit master code and all other data is still stored. For efficient use in poorly lit areas, the keypad features backlighting (which can be disabled). Silent mode can also be enabled if audible annunciation of keypresses is not desired.
• Office Buildings
- Accommodates up to 120 users
- Safe storage of data (all data is stored in the event of a power failure)
- Secure access codes (4-8 digits)
- Backlighting (can be disabled)
- Silent Mode (audible annunciation of keypresses can be disabled)
- Programmable lockout
- Variable output time delay (1-60 sec.)
- Surface mount design
|Description of Features
||Non-volatile EEPROM memory means your codes and instructions will be there whether you remove power for five minutes or five years.
||Rated at 5 amps, this Form A relay is tough enough to handle virtually any low-voltage equipment or electronic locking device.
|Each keypad provides a normally open input loop for remote triggering. Simple programming allows for a momentary closure upon this loop to trigger the output. This feature is especially useful as an exit request and can be disabled in software.
||All programming is accomplished entirely from the front of the keypad. LED and/or sounder guidance makes programming a snap and changing codes a matter of seconds for an authorized user
||Comes with enough memory to support up to 120 users.
||Activating this feature will cause the exit button to delay the doors' locked state until the code has been re-entered. By default the exit button will unlock the door for the programmed door unlock time.
|Keypad can be jumper configured as SPST relay output or 12VDC powered output rated at 1A max.
2 Year Limited Warranty
2-3/4"W x 4-1/2" H x 1-5/32" D
(70.0mm x 115.0mm x 29.0 mm)
5A @ 30VDC
Current Consumption (typical):
@12VDC Standby without backlight = 25mA
Standby with backlight = 75mA
Door relay energized with backlight = 100mA
Max Current Draw:
200mA (excluding electric release)
*If 12VDC output is selected, output is restricted to 1A
-4°F to 131°F (-20°C to 55°C)